Printing
from
a
High
Definition
television
The printer supports the HOMI (High-
Definition Multimedia Interface) output. By
connecting the printer to a television equipped
with an
HOMI input, you can view higher
precision photos on the television and perform
printing operations.
Use a commercially available
HOMI cable to
connect the HDMI OUT connector (A Type)
of
the printer to an HOMI input connector
of
a
television.
1 Prepare a commercially available
HOMI cable.
--
• Use an HOMI cable shorter than 3m in
length.
• Use an HOMI cable acquiring the HOMI
logo.
2 Connect the printer HOMI OUT
(output) connector to a HOMI input
connector of a television.
To
the HOMI OUT connector
High-definition television
To an HOMI input connector
While the printer outputs signals to the
television, the printer LCD screen goes
off.
3 Switch the
TV
input.
When the printer is connected to a
television and then the printer power is
turned on, a television supporting
HOMI
control function switches the input
automatically to the printer and displays
the printer pictures on the monitor. When
the television is on the standby mode, the
television power is also turned on.
--
• We cannot guarantee operations with all types
of
televisions.
•
If
the HOMI control setting
of
your television is
off, the television input does not switch
automatically. Settings differ depending on the
television you use. For details, see the manual
supplied with your television.
•
If
"CONTROL FOR HOMI" is set to "Off," the
input will not switch automatically (page 42).
Continued
43 GB
I
To Next Page
Loading...
Need help?
General
