Printer rear panel
[I] Handle
As illustrated below, raise the handle when
you carry the printer.
When you use the printer, close the handle to
its original position.
..
• When you carry the printer, make sure to
remove memory cards, external devices,
the paper tray,
AC
adaptor, and other
cables. Otherwise malfunctions
may
occur.
• When using the DPP-FP95, set the LCD
panel
to
its original position.
[2J
Ventilation holes
~
Paper outlet
~
OC
IN 24 V jack (
..........
page 12)
Plug the supplied AC adaptor into this
connector. Then connect the
AC
adaptor and
AC outlet with the power cord.
8 GB
Printer left side panel
[§]
HOMI OUT (output) connector
(
..........
page43)
When
using the printer with a High-definition
television, connect an
HOMI
cable into this
connector.
[§]
i'
USB connector (
..........
page 53)
When using the printer in PC mode, connect a
USB cable to this connector.
[lJ PictBridge/EXT INTERFACE
connector (
..........
pages 46
to
48)
When using a PictBridge-compliant digital
camera, a mass storage device such as a USB
memory
or
photo storage device, a Bluetooth
USB adaptor (OPPA-BTI *),
or
otherexternal
USB device, connect it via this connector.
(*In some regions, the
OPPA-BTI
Bluetooth
USB
adaptor
is
not sold.)
To Next Page
Loading...
