6-25
DSC-F828
Order Page
Address
Data Procedure
33 Calculate DRG2 using the
following equation
(Hexadecimal calculation)
DRG2 = D80 × 100 + D81
34 10 82 Read the data, and this data is
named D82.
35 10 83 Read the data, and this data is
named D83.
36 Calculate DBG2 using the
following equation
(Hexadecimal calculation)
DBG2 = D82 × 100 + D83
37 60 01 00 Set the data.
38 60 E1 00 Set the data.
39 60 12 A2 Set the data.
40 77 72 06 Set the data.
41 Wait for 2 sec.
42 60 01 F9 Set the data.
43 Wait for 2 sec.
44 60 E1
Read the data, and check it is “08”.
45 10 80 Read the data, and this data is
named D80.
46 10 81 Read the data, and this data is
named D81.
47 Calculate DRG3 using the
following equation
(Hexadecimal calculation)
D
RG3 = D80 × 100 + D81
48 10 82 Read the data, and this data is
named D82.
49 10 83 Read the data, and this data is
named D83.
50 Calculate DBG3 using the
following equation
(Hexadecimal calculation)
DBG3 = D82 × 100 + D83
51 Convert DRG0, DBG0, DRG1, DBG1,
DRG2, DBG2, DRG3 and DBG3 to
decimal number, and obtain
DRG0’, DBG0’, DRG1’, DBG1’,
DRG2’, DBG2’, DRG3’ and DBG3’.
52 Calculate R/G ratio (1), B/G ratio
(1), R/G ratio (2), B/G ratio (2),
R/G ratio (3) and B/G ratio (3),
using the following equations
(Decimal calculation)
R/G ratio (1) = (D
RG1
’/D
RG0
’) × 100
B/G ratio (1) = (D
BG1
’/D
BG0
’) × 100
R/G ratio (2) = (D
RG2
’/D
RG0
’) × 100
B/G ratio (2) = (D
BG2
’/D
BG0
’) × 100
R/G ratio (3) = (D
RG3
’/D
RG0
’) × 100
B/G ratio (3) = (D
BG3
’/D
BG0
’) × 100
Linearity check of high
luminance
53 Check that R/G ratio (1) satisfies
the specified value 1. (Decimal
number)
54 Check that B/G ratio (1) satisfies
the specified value 4. (Decimal
number)
Order Page
Address
Data Procedure
Linearity check of low
luminance
55 Check that R/G ratio (2) satisfies
the specified value 2. (Decimal
number)
56 Check that B/G ratio (2) satisfies
the specified value 5. (Decimal
number)
Linearity check of very low
luminance
57 Check that R/G ratio (3) satisfies
the specified value 3. (Decimal
number)
58 Check that B/G ratio (3) satisfies
the specified value 6. (Decimal
number)
Processing after Completing Adjustments:
Order Page
Address
Data Procedure
1 60 01 00 Set the data.
2 60 E1 00 Set the data.
3 60 12 00 Set the data.
4 60 14 00 Set the data.
5 75 09 Set the data memorized at
“Preparation”.
6 77 F6 Set the data memorized at
“Preparation”.
7 77 F7 Set the data memorized at
“Preparation”.
8 77 F2 Set the data memorized at
“Preparation”.
9 77 72 Set the data memorized at
“Preparation”.
10 75 17 Set the data memorized at
“Preparation”.
11 75 18 Set the data memorized at
“Preparation”.
12 75 19 Set the data memorized at
“Preparation”.
13 75 1A Set the data memorized at
“Preparation”.
14 75 1B Set the data memorized at
“Preparation”.
15 Save the data.
16 Wait for 2 sec.
17 Perform next adjustments.
If finish the camera system
adjustments, release the data
setting.
(See “1. Data Setting during
Camera System Adjustments”.)
To Next Page
Loading...
