Name: Sony DSC-F828
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6-1

DSC-F828

SECTION 6

ADJUSTMENTS

1. Before starting adjustment

EVR Data Re-writing Procedure When Replacing Board

The data that is stored in the repair board, is not necessarily correct.

Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.

Procedure 1

Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a board

is replaced.

Remove the Flash Memory and install it.

(Former board)

(New board)

(Machine to be repaired) (Machine to be repaired)

(The same model of the same destination)

Save the data.

Download the data.

Procedure 2

Remove the Flash Memory from the board of the machine that is going to be repaired. Install the removed

Flash Memory to the replaced board.

Procedure 3

When the data cannot be saved due to defective Flash Memory, or when the Flash Memory cannot be removed

or installed, save the data from the same model of the same destination, and download it.

After the EVR data is saved and downloaded, check the

respective items of the EVR data.

(Refer to page 6-3 for the items to be checked.)

(Machine before starting repair)

(Machine after a board is replaced)

PC PC

Save the EVR data

to a personal computer.

Download the saved

data to a machine.

Ver 1.3 2004. 07

Other manuals for Sony DSC-F828

Questions and Answers:

Need help?

Do you have a question about the Sony DSC-F828 and is the answer not in the manual?

General