Sony DSC-F828 - Record of Use Check; Self Diagnostics Log Check

6-34
DSC-F828
10.Record of Use check
Page 4F Address 94 to 97
Using method:
1) The recording counter data is displayed at page: 4F, addresses: 94 to 97. These data are named D
94, D95, D96 and D97 respectively.
2) Calculate the recording counter (N) using following equation. (Hexadecimal calculation)
N = D97 + D96 × 100 + D95 × 10000 + D94 × 1000000
11.Self Diagnostics Log check
Page 20 Address B0 to B8
*1: “C” t “01”, “E” t “03”
Using method:
1) The self diagnostics log is displayed at page: 20, addresses: B0 to B5.
Note: These data will be erased when the lithium battery (LR-018 board) is removed.
Address Function Remarks
94 Recording counter 1000000-digit and 1000000-digit
95 (Hexadecimal) 1000000-digit and 10000-digit
96 1000-digit and 100-digit
97 10-digit and 1-digit
Address Initial value Function
B0 00 “Repaired by” code (Occurred 1st time) *1
B1 00 “Block function” code (Occurred 1st time)
B2 00 “Detailed” code (Occurred 1st time)
B3 00 “Repaired by” code (Occurred 2nd time) *1
B4 00 “Block function” code (Occurred 2nd time)
B5 00 “Detailed” code (Occurred 2nd time)
B6 00 “Repaired by” code (Occurred 3rd time) *1
B7 00 “Block function” code (Occurred 3rd time)
B8 00 “Detailed” code (Occurred 3rd time)