Name: Sony DSC-F828
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6-23

DSC-F828

9. CAMERA Adjustment 5

Note: “CAMERA Adjustment 5” is available only once after the

power is turned on. If the adjustment is retried, turn off the

power and turn on again.

[Automatic Adjustment Program execution items and

sequence]

1. Data Setting during Camera Adj.

2. Strobe Adj.

3. AF Laser Output Adj.

4. Release of Data Setting during Camera Adj.

[Adjusting method]

1) Click the [CAMERA Adjustment 5 Start] button.

2) The Automatic Adjustment Program executes the “1. Data

Setting during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-

ject in accordance with the message.

(For the Flash adjustment box, refer to “4. Preparing the Flash

Adjustment Box” (see page 6-6).)

Fig. 6-1-49

4) Press the [OK] button, and the “2. Strobe Adj.” will be ex-

ecuted.

5) During execution of “2. Strobe Adj.”, the following message

is displayed. After checking the flashing of strobe light, click

the [OK] button. (This message is displayed 2 times during

execution of adjustment.)

Fig. 6-1-50

6) Upon successful completion of “2. Strobe Adj.”, “3. AF Laser

Output Adj.” is executed.

7) Upon successful completion of the “3. AF Laser Output Adj.”,

the “4. Release of Data Setting during Camera Adj.” will be

executed successively.

8) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the

[OK] button.

Fig. 6-1-51

Other manuals for Sony DSC-F828

Questions and Answers:

Need help?

Do you have a question about the Sony DSC-F828 and is the answer not in the manual?

General