6-13
DSC-F828
Button Name Adjustment Subject
Adjustment Adjustment
Page Address
IRIS Reset Sensor Adj.
Clear chart (PTB-450/PTB-1450)
6F 5E, 5F
CAMERA Adjustment 1
(All white)
Flange Back Adj. Arbitrary 6F 18 to 3E, 40 to 53
Siemens star
CAMERA Adjustment 2 Flange Back Check (1.0m from front the lens)
(Luminance: 200 to 400 lux)
(Note) Color Shade Check
Clear chart (PTB-1450)
6F 06, 07
(Standard picture frame)
F No. Compensation
Clear chart (PTB-450/PTB-1450)
6F 60 to 64, 6B to 6D
CAMERA Adjustment 3 Mechanical Shutter Adj. 6F 6B to 6D, B8 to D7
Light Value Adj.
(Standard picture frame)
6F 65 to 67
Linear Matrix Adj.
9 colors chart (PTB-1450)
6E 80 to 9F
(Note)
AWB 3200K/5800K
(Standard picture frame)
6E 04 to 21, 24 to 49
Standard Data Input
Color bar chart (PTB-450)
Color Reproduction Check
(Standard picture frame)
9 colors chart (PTB-1450)
(Standard picture frame)
CAMERA Adjustment 4 CCD Linearity Check
CCD White Defect
Clear chart (PTB-450/PTB-1450)
Compensation Check
(Standard picture frame)
CCD Black Defect
Compensation Check
Strobe Adj.
6E 72 to 75
CAMERA Adjustment 5 Flash adjustment box (50 cm) 6F D8 to EF
AF Laser Output Adj. 6F 10 to 16
CAMERA Adjustment 6 AF Laser Axis Check Flash adjustment box (1 m)
Table 6-1-3
1-4-2. Adjustment Items of Camera System Adjust-
ment
The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into four, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note: Use the DSC-F828 C1 MATRIX ADJ (F828C1MATRIX.exe)
when performing “Color Shade Check”, “Linear Matrix
Adj.” and “AWB 3200K/5800K Standard Data Input” of
Camera System Adjustment.
To Next Page
Loading...
