EasyManua.ls Logo

Sony DSC-W270 - Page 54

Sony DSC-W270
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The
remaining charge indicator is incorrect.
The battery charge vdll quickly get nscd up and the actual remaining battery charge vdll bc
lower than the indicator in the following cases:
When you use the camera in an extremely hot or cold location.
When you use the flash and zoom frequently.
When you repeatedly turn the power on and off.
When you set the screen brighmess higher using DISP (screen display) settings.
A discrepancy arose between the remaining charge indicator and the actual rcmaining battery
charge• Fully discharge the battery pack once, then charge it to correct the indication.
The battery pack is discharged• Insert the charged battery pack (page 12).
The battery pack is dead• Replace it with a new one.
Cannot charge the battery pack while it is inside the camera.
You cannot charge the battery pack using the AC Adaptor (sohl separately). Use the battery
charger (supplied) to charge the battery.
The CHARGE lamp flashes while charging the battery.
Remove and reinsert thc battery pack, making sure it is installed correctly.
The temperature may be inappropriate for charging. Try charging the batte U pack again
within the proper charging temperature range (10°C to 30°C (50°F to 86°F)).
Cannot record images.
Check the frce capacity of the internal memory or "Memory Stick Duo" media (pages 28, 31 )
If it is full, do one of the following:
Delete unnecessary images (page 35).
Change the "Memory Stick Duo" media.
You cannot record images while charging the flash.
When shooting a still image, set the mode dial to other than [_ (Movie Mode).
Set the mode dial to _ (Movie Mode) when shooting movies.
Movies with the size set to [1280x720] can only be recorded on a "Memory Stick PRO Duo"
media. When using recording media other than "Memory Stick PRO Duo" media, set the
movie image size to [VGA].
The camera is in Smile Shutter demonstration mode. Set [Demo Mode] to [Off].
White, black, red, purple or other streaks appear on the image, or the image
seems reddish.
This phenomenon is called smearing. This is not a malfunction.
54 GB

Related product manuals