Sony HCD-CL3 - Amp Board, Power Transformer; CD Mechanism

10
HCD-CL1/CL3
3-6. AMP BOARD, POWER TRANSFORMER
1 Connector
(CN901)
2 Connector
(CN902)
3 Four screws
(+BVTP 4
× 8)
6 Three screws
(
+BVTP 3 × 8 )
5 Two screws
(
+BVTP 3 × 16 )
7 Amp board
8 Two screws
(+BVTP 3
× 8)
4 Power
transformer
9 Heat sink
q; Two screws
(
+BVTP 3 × 8 )
qs Cord bushing
qa Sub power board
3-7. CD MECHANISM
3 Chassis assy
5 CD mechanism deck
(CDM63B)
2 Two screws
(
+BVTP 3 × 8)
1 Three screws
(
+BVTP 3 × 8 )
4 Four screws
(
+BVTP 3 × 8 )
Note: When installing the CD mechanism, the four bosses
must be aligned with the specified positions.