EasyManua.ls Logo

Sony HCD-GTR7 - MAIN BOARD IC500 (SYSTEM CONTROL); IC500 Pin Assignments and Descriptions

Sony HCD-GTR7
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
HCD-GTR6/GTR6B/GTR7/GTR8/GTR8B
MAIN BOARD IC500 R5F3640MDFAR (SYSTEM CONTROL)
Pin No. Pin Name I/O Desciption
1 LED DRIVER-CLOCK O Clock signal for LED Driver IC.
2 LED DRIVER-DATA O Data signal for LED Driver IC.
3 STBY LED O LED drive signal output of POWER indicator.
4 SIRCS I Remote control signal input
5
METER BACKGROUND
LED
O Meter Bachground LED port control.
6 NO USE O Unused port (Output port setting - open)
7 LED DRIVER-LATCH O Latch control signal for LED Driver IC.
8 BYTE Ground terminal
9 CNVss Ground terminal
10 XC-IN I Sub system clock input terminal (32.768kHz)
11 XC-OUT O Sub system clock output terminal (32.768kHz)
12 RESET
I
System reset signal input from the reset signal IC “L”: reset After the power supply rises,
“L” is input for several hundreds msec and then change to “H”.
13 X-OUT O Main system clock output terminal (5MHz)
14 VSS Ground terminal
15 X-IN I Main system clock input terminal (5MHz)
16 VCC Power supply terminal (+3.3V)
17 NMI I Non-maskable interrupt input terminal
18 USB OC 1 I USB A over current detect pin.
19 USB OC 2 I USB B over current detect pin.
20 AC-CUT I AC off detection signal input from the reset signal IC “L”: AC Cut detected
21 USB HUB RESET O USB HUB reset port.
22 USB VBUS DET O USB VBUS Power detect for output enable.
23 MTK RESET I Disc tray status detection signal input from CDM
24 MTK XIFCS I MTK chip selector
25 MTK BUSY O MTK chip busy status output.
26 CIG BK O Backlight control signal for CIG (Chip In Glass) of uorescent indicator tube.
27 USB OE O USB output enable port
28 CIG LATCH O Latch control signal for CIG (Chip In Glass) of uorescent indicator tube.
29 IIC-CLK I/O Clock signal for IIC communcation for Master Control controller.
30 IIC-DATA I/O Data signal for IIC communcation for Master Control controller.
31 STK-MUTE O Power ampli er and sub woofer ampli er on/off control signal output “H”: ampli er on
32 PROTECTOR I Speaker protect detection signal input from speaker protect circuit “L”:protector on
33 LINK RELAY O Surround speaker mode control signal “H”:LINK “L”:MATRIX SURROUND1/2
34 LMR O CDM loading motor control signal output
35 CIG DATA O Data signal for CIG (Chip In Glass) of FL Display.
36 LMF O CDM loading motor control signal output
37 CIG CLK O Clock signal for CIG (Chip In Glass) of FL Display.
38 TMR O CDM turning motor control signal output
39 TMF O CDM turning motor control signal output
40 E-1 I Disc tray status detection signal input from CDM
42 E-2 I Disc tray status detection signal input from CDM
41 LED DRIVER OE O LED driver Output enable (H) / disable (L).
43 E-3 I Disc tray status detection signal input from CDM
44 TBL-SENSE I Disc tray position detection signal input from CDM
45 SW-RELAY O Relay drive signal output for the passive sub woofer “H”:relay on
46 OPEN-SW I Eject detection signal input from CDM
47 MTK SIO O MTK serial data out
48 MTK SOD I MTK serial data in
49 MTK-CLK I MTK serial clock
50 FR RELAY O Relay drive signal output for the front speakers “H”:relay on
51 LINE-MUTE O Line muting on/off control signal “L”:muting on
52 AUDIO IC DATA O Serial data output to audio signal IC, R2A15216FP

Table of Contents

Related product manuals