5 (E)
HDCU3300/MM (J,E)
Purpose of this manual
This manual is the maintenance manual of the following models :
HD Camera Control Unit HDCU3300
SD Encoder Unit HKCU1001
Multi Interface Unit HKCU1003
SDI Output Expansion Unit HKCU1005
This manual intended for use by trained system and service engineers describes
(service overview and the circuit overview, the main part replacements, electrical
alignment, parts list, semiconductor pin assignments, block diagrams, schematic
diagrams, board layouts.) required for parts-level service.
Related manuals
Beside this Installation Manual, the following manuals are available for the unit.
. Operation Manual (Supplied with HDCU3300)
This manual describes how to operate the HDCU3300.
. Installation Manual (Available on request)
This manual is intended for use by trained system and service engineers, and
describes the information regarding the installation of the unit and the information
that premises the service based on components replacement.
For obtaining, contact your local Sony Sales Office/Service Center.
Part number : 9-968-307-0X
. “Semiconductor Pin Assignments” CD-ROM (Available on request)
This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in Broadcast and Professional equipment.
This manual contains a complete list of semiconductors and their ID Nos., and
thus should be used together with the CD-ROM.
Part number: 9-968-546-0X
Manual Structure
To Next Page
Loading...
