30
b Notes
• If “The image database file is corrupted. The
media must be restored to use again.” appears,
format the memory card (p. 83).
• When inserting or ejecting the memory card, be
careful of the memory card popping out and
dropping.
Selecting the memory card slot to be
used for recording
Press the memory card slot A or slot B
button to select the inserted memory card
for recording. You can confirm the selected
slot on the screen.
b Notes
• You can only select a slot that already has a
memory card inserted.
• When recording to a memory card, you cannot
switch the slot even if you press the memory
card slot A or slot B button.
z Tips
• When only one slot has a memory card inserted,
the slot that has the memory card is selected
automatically.
• When the memory card becomes full during
recording, the camcorder automatically switches
to the other slot if a memory card is inserted
(relay recording, p. 32).
If a repair memory card prompt screen
appears
There may have been a problem recording
to the memory card during the most-recent
recording. Select [OK] to repair the card to
the extent possible. Select [Cancel] to
continue without repairing.
SD ONLY
Memory card slot A button
Memory card slot B button
Step 7: Inserting a memory card (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
