Operating Instructions
_:_ DIGITALCABLEBOXUSERS:Do not usethis connection.The1-0CONVERTERjack is r_otcompatible
with digita|boxes.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
UsingyourTV with this connection
Program your Sony remote control to operate your VCR or cable box (see page 5).
_1 To activate your remote, press _CEDto operate your VCR or CED to operate your cable
box. To do this, first program your remote control, then use the Channel Fix feature to set
your TV to channel 3 or 4 (see page 33).
Q Press CEDrepeatedly to switch between VCR mput (VIDEO mput), VHF/UHF (local
channels or unscrambled), or cable box (cable system or scrambled channels).
16
To Next Page
Loading...
