Connecting Your TV
Connecting a TV and Satellite Receiver
From
cable/
antenna
Satellite receiver
Rear of TV
A _ _; ....... Video (yellow)
_ Audio L (white)
Audio R (red)
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiven
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
UsingyourTV with this connection
This connection allows you to do the following:
[3 Program your Sony remote contIol to operate your satellite receiver (see page 8).
8AT_LE
To activate your remote, press CZD to operate your satellite receiver. See page 7 on how
to operate other functions.
n Press _ repeatedly to switch to satellite receiver input (VIDEO input).
17
To Next Page
Loading...
