Names and Functions of Parts of the Menu 43
Chapter
2
Names
and
Functions
of
Parts
Names and Functions of Parts of the Menu
Overview
In the MVS system, all detailed settings for basic
operations such as transitions, keys, and wipes, and DME
are made in menus. In addition, system management, data
management, and setup are all performed using menu
operations.
Use the optional ICP-6511 menu panel to perform menu
operations. You can also display menus on an external
monitor, and operate using a mouse or touch panel.
For information about using the mouse,
1
“Operation
with a Mouse” (p. 51).
For information about supported monitors, contact your
Sony representative.
Top Menu List
When the control panel is powered on, the top menu list
appears as shown below.
In the same way as for the top menu selection buttons on
the menu panel, press each button to display the
corresponding top menu in the menu display.
Press [Shutdown] on the bottom right to shut down the
control panel.
For details about shutting down the control panel,
1
“Shutting down the control panel” (p. 56).
Notes
•
The arrangement of buttons in the top menu list and the
default arrangement of the top menu selection buttons
may be different.
•
Changing the top menu selection button assignment in
the Setup menu has no effect on the top menu list.
Menu Screen
The menu screen consists of the following principal parts.
The section describes the M/E-1 >Key1 >Type menu
(1111) screen as an example.
To Next Page
Loading...
