Names and Functions of Parts of the Menu 47
Chapter
2
Names
and
Functions
of
Parts
Numeric Keypad Window
1
Item display
2
Max./min. value
indication
3
Input display
4
[Close] button
5
TC (timecode) button
h
[Trim] button
After entering the difference from the current value, press
this button to confirm the numeric input.
i
[Enter] button
This confirms the entered value.
If correctly set, the numeric keypad window closes.
If it is not correctly set, the input display changes color.
6
– (minus) button
7
[Clear] button
8
[Trim] button
9
[Enter] button
a
Item display
This is the name of the parameter being set in the numeric
keypad window.
b
Max./min. (maximum/minimum) value indication
This shows the maximum and minimum values of the
parameter.
c
Input display
This is the value being input into the numeric keypad
window.
d
[Close] button
This closes the numeric keypad window.
e
TC (timecode) button
When the numeric keypad window is opened for a setting
requiring a timecode value to be entered, this button
appears in a depressed state.
The range of timecode values you can enter varies as
follows depending on the signal format.
00:00:00:00 to 23:59:59:nn,
where nn = (number of frames per second) – 1.
f
– (minus) button
This toggles the sign of the entered value.
g
[Clear] button
This clears the input display. It does not change the
parameter setting.
To Next Page
Loading...
