Sony PRS-950 - Page 131

Changing Settings
131
Table of Contents Index
Registering a new access point not displayed in the
list
Tap [New Wi-Fi Network]
p
tap the desired setting
method.
There are 3 way to register the access point. Set up
following the instructions on the screen.
Item Description
[WPS Push Button] Connects to the WPS-compliant access
point by using the push-button
method.
[WPS PIN Input] Connects to the WPS-compliant access
point using the PIN method. Enter the
PIN code of Reader (an 8-digit number)
by tapping the numeric key pad
p
tap
[OK].
[Manual Input]
Allows you to enter the SSID manually.
When the access point is set to hide the
SSID, use this setting.
Enter the SSID of the access point using
the on-screen keyboard
p
tap [OK].
When the detailed setting items are
displayed, make the required settings
(
r
xx).
Notes
ˎ
For information on the WPS settings of your access point,
refer to the operation guide of the access point.
ˎ
After WPS setting for wireless LAN connection between the
player and access point, the access point may become
unconnectable to devices that were previously connected.
For details, refer to the operation guide of the access point.