Sony PRS-950 - Page 130

Changing Settings
130
Table of Contents Index
Item Description
[Wi-Fi Advanced
Settings]
[IP Address]: Tap [Auto] to set the IP
address automatically by using DHCP
when the access point supports DHCP.
To set the IP address manually, tap
[Manual]
p
a field to change. Input a
number by tapping the numeric key
pad
p
tap [OK].
[DNS]: Enter the IP address of DNS
Server by tapping the numeric key pad
p
tap [OK].
[Proxy]: When the Wi-Fi you intend to
connect to does not use a proxy server,
tap [Off]. When using a proxy server,
enter IP address and port number by
tapping the numeric key pad
p
tap [OK].
Note
When setting the IP address manually, it is necessary to set
[DNS] manually. If the message dialog is displayed when
tapping [Manual], tap [Yes].
When the setting of access point is completed, the
registration complete dialog is displayed.
When connecting the Reader with the access point
that finished being set, tap [Connect]. When not
connecting, tap [Finish]. The [Wi-Fi Network Settings]
screen is displayed.