Troubleshooting
143
Table of Contents Index
q
When inserting the memory card into the Reader, it may
take time for the Reader to recognize the content files in
the memory card especially if the number of the content
files stored on the memory card is large.
Content cannot be transferred to a memory card.
q
Unlock the erasure prevention switch if it is locked.
q
There is not enough free space on the memory card.
Check [About] (
r
89) for free space on the memory card,
then delete unnecessary data (
r
74).
q
The Reader cannot transfer content to memory cards
directly. Use Reader Library to transfer content.
A memory card cannot be recognized on the Reader or Reader
Library.
q
If a memory card is formatted by your computer, it may
become unusable on the Reader and Reader Library.
When formatting a memory card, format it using the
Reader (
r
95).
Content on a memory card cannot be deleted.
q
Unlock the erasure prevention switch if it is locked.
q
Uncheck the read-only attribute of content from your
computer.
To Next Page
Loading...
