How to create a PS3 HD-MPG from HD-
TS (Best Result For Below 1.6FW)
Forget conversions! I tried that for a month, I played with SOOOOO many converters, encoders,
muxer, U cant get a same HD output like input...but I finally found a solution!
Tools needed:
● HDTVtoMPEG2
● DGIndex
● FFmpeggui03c
● Mpeg2VCR (for muxing)
Download
here
Ok, U know where to find a HD Movies .ts
Lets say U have a HD .ts Movie...and then...?!
Step 1 If your video source is at 1920x1088
If your video source is at "normal" resolution start with step 2.
1. 1088i to 1080i
❍ Start HDTVtoMPEG2, right click on HDTVtoMPEG2 tab on taskbar select Configure,
check box Preserve bit rate and Set vertical_size to 1080, click OK. Click Add and browse
your .ts file ,open it ,when loaded in Output File Name Type set Transport Stream(ts).
Click Process. U will get a 1080i .ts. Close HDTVtoMPEG2. Now continue with 2. and
forward
❍ Because PS3 doesn't play .mpg with AC3 6ch or 2ch sound when movie is burned on a
DVD (u will get only picture with no sound :thumbsdown:) we need to convert AC3
6ch to a stereo .mp2. First we must demux .mpg (split video and audio)...
2. Demuxing:
❍ Start DGIndex, press F2 ,browse to your .ts file, click on it, then click open, then click OK.
The movie is loaded. Click File ----> Save project and demux video , it will start exporting
the video(m2v)&audio(ac3). Go to the WC
❍ After a while U will get a two files ,m2v & ac3.
❍ EDIT: U will see that .ac3 file in it name has a audio offset value, example -276 ms. Write
that number down!
To Next Page
Loading...
