Sony PS3 - Installing the Built-In Sony PS3 Wi-Fi Kernel

Yellow Dog Linux 5.0 Installation
id:3:initdefault:
... and change it to:
id:5:initdefault:
7. Edit the file /etc/kboot.conf and change the line that reads:
default=ydl
... to ...
default=ydl480i
8. Reboot your system:
reboot [ENTER]
Your system will now start by default into a low resolutions graphical mode.
7. Networking.
Installing the built-in Sony PS3 Wi-Fi kernel
1. Update the firmware on your PS3. This can be achieved from GameOS with the Software Update
function in settings. This must be v1.6 or newer.
2. Download the new PS3 Wi-Fi enabled kernel (if you are upgrading a prior install). This is
found via your YDL.net Enhanced account or the public mirrors. You will need kernel-ps3-
2.6.16-20070425.ydl.3.ppc64.rpm or newer.
3. Install the new kernel;
rpm -ivh /path/to/kernel-ps3-2.6.16-20070425.ydl.3.ppc64.rpm [ENTER]
4. Edit /etc/kboot.conf. Copy the default kernel line in kboot.conf, then modify the
original line to point to the new kernel: For example, if your default kernel line is:
ydl='/dev/sda1:/vmlinux-2.6.16-20061110.ydl.2ps3 initrd=/dev/sda1:/
initrd-2.6.16-20061110.ydl.2ps3.img (wrap)
root=/dev/sda2 video=ps3fb:mode:3 rhgb'
... the modified entry would like this:
www.sharatronica.com