crammed into the back battery area of the 360 controller. The left and right analog sticks from the 360
are kept stock and a resistor adjusts them to work with the PS3. It may not look like much but there
was a good deal of finagling to get everything to fit and work correctly, especially the right analog
stick. (Left at its original position on the PCB, but lifted .075″)
The top/back of the unit. The USB cable plugs in where the Charge and Play port used to be. Luckily
the Microsoft hologram sticker is there, letting you know at least the case plastic is genuine.
To Next Page
Loading...
