38
GB
The recording pauses when no sound is
detected and “PAUSE” flashes. When the
IC recorder detects sound again, the
recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in step 3.
P Notes
• The VOR function is affected by the sound
around you. Set “Mic Sensitivity” in the
menu (page 91) according to the recording
conditions. If recording is not satisfactory
after you have changed the “Mic Sensitivity”
setting, or for an important recording, set
“VOR” to “OFF” in the menu.
• During the FM recording (page 75), the
VOR function does not work.
To Next Page
Loading...
