6-3
No. Problem Main Possible Cause
Mechanism Operations and
State After Occurrence
Front unloading cannot be performed • The cassette drive mechanism is Front loads and shifts to the STOP or
when ejecting the cassette. faulty . INITIAL mode.
(Front loading can be pertormed.) • The front door is caught. • When the power switch is turned on
before eject operations: Shifts to the
06 STOP mode.
• When the power switch is turned off
before eject operations: Shifts to the
INITIAL mode and the power goes
off.
Front loading and front unloading • The tape cassette is caught in the The power is forcibly turned off with
cannot be performed when ejecting cassette drive mechanism. the mechanism at its current position.
the cassette. • The main cam and front rack gear of
07
the front loading mechanism have
not engaged properly.
• The gears of the front loading drive
mechanism have not engaged
properly.
The mechanism becomes 1(REVIEW)
• The mechanism mode switch The power is forcibly turned off with
08
while moving from 2 (IDLER), contact is faulty. the mechanism at its current position.
3 (STILL), 4 (BRAKE), and to
5 (STOP).
The mechanism becomes 7 (INITIAL)
• The mechanism mode switch Carries out tape take-up operations,
09
while moving from 1 (REVIEW), contact is faulty. shifts to the INITIAL mode,
2 (IDLER), 3(STILL), 4 (BRAKE), and the power goes off.
and to 5 (STOP).
Note: For details of mechanism operations corresponding to the mechanism positions of the self-diagnosis numbers 08
and 09 above, refer to the separate volume on the V95 I mechanism manual.
These manual reference numbers are shown in the cover.
Mechanism Mode Display Contents
Mode No. Mechanism Mode Mode No. Mechanism Mode Mode No. Mechanism Mode
00 CASSETTE OUT 08 PLAY 16 VIDEO INSERT
01 STANDBY 19 REC 17 VIDEO INSERT – PAUSE
02 STOP 10 AUDIO DUBBING 18 AUDIO/VIDEO INSERT
03 STILL 11 X2 SPEED PLAY 19 REVERSE X2 SPEED PLAY
04 REC-PAUSE 12 CUE
05 AUDIO DUBBING – PAUSE 13 REVIEW
06 FRAME ADVANCE 14 FAST FORWARD
07 SLOW 15 REWIND 99 OTHERS
To Next Page
Loading...
