To Next Page
D
Darryl BellAug 28, 2025
What to do if my 3D image is not displayed on Sony STR-DA2800ES Receiver?
- Zzachary72Aug 29, 2025
If a 3D image is not displayed on your Sony Receiver, check the 3D image formats supported by the receiver.
What to do if my 3D image is not displayed on Sony STR-DA2800ES Receiver?
If a 3D image is not displayed on your Sony Receiver, check the 3D image formats supported by the receiver.
How to fix no sound from specific speakers on Sony STR-DA2800ES Receiver?
If there is no sound from specific speakers when using your Sony Receiver, connect headphones to the PHONES jack to verify that sound is output to the headphones. If only one channel is output to the headphones, check that all the cords are fully inserted into the jacks on both the receiver and the equipment. If both channels are output to the headphones, check the connection of the front speaker which is not outputting any sound.
How to fix severe hum or noise on Sony STR-DA2800ES Receiver?
If you are experiencing severe hum or noise with your Sony Receiver, check that the speakers and equipment are connected correctly. Ensure connecting cords are away from transformers, motors, TVs, or fluorescent lights. Move your TV away from the audio equipment. If the plugs and jacks are dirty, wipe them with a cloth slightly moistened with alcohol.
What to do if the iPod/iPhone cannot be charged on my Sony Receiver?
Check that the receiver is turned on. Make sure the iPod/iPhone is connected firmly.
What to do if the Universal Remote Control function does not work on my Sony Receiver?
Make sure the connections required are made. Press ?/1 on the remote control to turn the receiver off and then on again. Hold down ?/1 on the receiver until the lamp above the button flashes in green to reboot the receiver. If the remote sensor of the receiver and that of another Sony product face the same direction, interference may occur. In this case, set the remote sensors so that they face different directions or use an IR shield on the other Sony product to shield the IR from interference from the receiver IR remote.
What to do if the Pass Through function does not work on Sony STR-DA2800ES Receiver?
If the Pass Through function isn't working on your Sony Receiver, ensure that “HDMI A” is selected using the HDMI OUTPUT button, as “HDMI B” or “Off” will disable it. Also, if “Control for HDMI” is set to “On” and “Pass Through” is set to “Auto,” the receiver saves power in standby mode based on the TV's status. To enable power saving, the “Control for HDMI” on the TV should be effective; if not, set “Pass Through” on the receiver to “On.”
How to troubleshoot Sony Receiver HDMI output problems?
If the HDMI output on your Sony Receiver isn't functioning correctly, make sure that the output of the HDMI video signals of the receiver is set to “HDMI A” or “HDMI B” using the HDMI OUTPUT button. When “Zone2 Out” is set to “Off,” no signals from HDMI ZONE 2 will be output. The audio and video signals of the HDMI IN jacks will not be output from the HDMI ZONE 2 OUT jack when the same input is and the GUI menu is displayed on the TV in the main zone.
What should I do if the subwoofer is not functioning with my Sony Receiver?
If the subwoofer is not functioning with your Sony Receiver, check that the subwoofer is connected correctly and securely. Make sure you have turned on your subwoofer.
What to do if my Sony Receiver is overheating?
If the top of your Sony Receiver is hot, this is specific to this amplifier and is not a malfunction.
Why does my Sony STR-DA2800ES Receiver turn on automatically?
If your Sony Receiver is turning on automatically, it might be due to the “Control for HDMI” being set to “On” or “Pass Through” being set to “Off.” In this case, the receiver may be turned on by operating other equipment connected to it.
Essential safety guidelines to prevent hazards like fire and electric shock.
Identification and function of the receiver's front panel components.
Details on digital, antenna, LAN, RS232C, and control jacks on the rear.
Identification and function of buttons on the RM-AAU155 remote control.
Essential steps and information before connecting any equipment to the receiver.
Explains different speaker setups like 7.1, 5.1 channels, and their configurations.
Detailed diagrams and instructions for connecting speaker wires to receiver terminals.
Steps and diagrams for connecting a TV using an HDMI cable.
How to connect devices with HDMI output jacks to the receiver's HDMI inputs.
Explanation of HDMI audio/video support, Control for HDMI, and high-resolution formats.
How to connect audio equipment with HDMI output jacks to the receiver.
How to properly connect the AC power cord to the receiver and wall outlet.
Using the on-screen Easy Setup for initial receiver configuration.
How to access and navigate the main home menu options.
Steps to select, play, and control audio/video content from connected devices.
Steps to connect a USB device and play back video, music, or photo files.
How to connect and control iPod/iPhone for music, video, and photo playback.
How to choose and apply different sound field modes for audio playback.
Specific sound fields optimized for movie playback like HD-D.C.S. and Dolby/DTS modes.
How to select and switch between different AV equipment for remote operation.
Explains enjoying audio/video in a zone other than the main zone.
Explanation of Sony's BRAVIA Sync feature and its reliance on HDMI CEC.
Procedure to clear all settings and reset the receiver to its original factory defaults.
Steps to enter and navigate the main settings menu on the TV screen.
Overview of settings related to initial setup and speaker configuration options.
Re-running the Easy Setup process for basic receiver configuration.
Using the Digital Cinema Auto Calibration for automatic speaker setup and matching.
Calibrating speaker phase characteristics for better surround sound imaging.
Manually adjusting the volume level for each individual speaker.
Converting analog video input signals to various resolutions for output.
Enabling HDMI control and signal pass-through functions.
Customizing input display names, icons, and visibility in menus.
Safety guidelines for handling objects, power sources, and heat buildup.
Solutions for automatic power changes, no picture/sound, and hot receiver issues.
General| Bi-amping | Yes |
|---|---|
| Night mode | No |
| Sample rate | 192 kHz |
| Product color | Black |
| Connector contacts plating | Nickel |
| Case or master carton weight | 15 kg |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 290 W |
| Dimensions (WxDxH) | 500 x 258 x 487 mm |
| Total Harmonic Distortion (THD) | 0.09 % |
Weight and Dimensions| Weight | 12400 g |
|---|
