What does it mean when there is erroneous display on my Sony STR-DA2800ES?
If you are experiencing an erroneous display on your Sony Receiver, the data stored in the USB device may have been corrupted. The character codes that can be displayed by this receiver are: Upper case (A to Z), Lower case (a to z), Numbers (0 to 9), Symbols (’ < > * +, – . / @ [ \ ] _ ‘). Other characters may not be displayed correctly.
How to fix radio stations that cannot be tuned in on Sony STR-DA2800ES Receiver?
If radio stations cannot be tuned in on your Sony Receiver, check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) and connect an external antenna (aerial), if necessary.
What to do if images appear later than the associated sound is played on my Sony STR-DA2800ES?
If images appear later than the associated sound is played on your Sony Receiver, change the setting of “A/V Sync” in the Audio Settings menu.
What to do if my 3D image is not displayed on Sony STR-DA2800ES Receiver?
If a 3D image is not displayed on your Sony Receiver, check the 3D image formats supported by the receiver.
How to fix no sound from specific speakers on Sony STR-DA2800ES Receiver?
If there is no sound from specific speakers when using your Sony Receiver, connect headphones to the PHONES jack to verify that sound is output to the headphones. If only one channel is output to the headphones, check that all the cords are fully inserted into the jacks on both the receiver and the equipment. If both channels are output to the headphones, check the connection of the front speaker which is not outputting any sound.
How to fix multi-channel sound that cannot be output on Sony STR-DA2800ES Receiver?
When “Control for HDMI” is set to “On,” “Audio Out” may be automatically set to “AMP.” In this case, set “Audio Out” to “AMP.
What to do if my 4K image is not displayed on Sony Receiver?
If a 4K image is not displayed when using your Sony Receiver, check the video capability and setting of your TV or video device. Also, make sure to connect the video equipment to an available 4K HDMI IN jack of the receiver.
How to fix no picture or unclear picture on Sony Receiver?
If you're experiencing no picture or an unclear picture on your TV screen or monitor when using your Sony Receiver, select the appropriate input on the receiver and set your TV to the appropriate input mode. Move your TV away from the audio equipment. Ensure that cables are correctly and securely connected to equipment. Depending on the playback equipment, equipment may need to be set up. The input signal should be the same as input when you are up-converting an input signal with this receiver. Assign the component video input correctly.
Why does my Sony Receiver keep turning off automatically?
Your Sony Receiver might be turning off automatically because “Auto Standby” is set to “On”. Alternatively, the sleep timer function might be active, or the “PROTECTOR” function is enabled.
What to do if the left and right sounds are unbalanced or reversed on my Sony Receiver?
If the left and right sounds are unbalanced or reversed on your Sony Receiver, check that the speakers and equipment are connected correctly. Adjust the balance parameters using the “Speaker Setup” in the Speaker Settings menu. Adjust the level of the speakers.
Essential safety guidelines to prevent hazards like fire and electric shock.
Identification and function of the receiver's front panel components.
Details on digital, antenna, LAN, RS232C, and control jacks on the rear.
Identification and function of buttons on the RM-AAU155 remote control.
Essential steps and information before connecting any equipment to the receiver.
Explains different speaker setups like 7.1, 5.1 channels, and their configurations.
Detailed diagrams and instructions for connecting speaker wires to receiver terminals.
Steps and diagrams for connecting a TV using an HDMI cable.
How to connect devices with HDMI output jacks to the receiver's HDMI inputs.
Explanation of HDMI audio/video support, Control for HDMI, and high-resolution formats.
How to connect audio equipment with HDMI output jacks to the receiver.
How to properly connect the AC power cord to the receiver and wall outlet.
Using the on-screen Easy Setup for initial receiver configuration.
How to access and navigate the main home menu options.
Steps to select, play, and control audio/video content from connected devices.
Steps to connect a USB device and play back video, music, or photo files.
How to connect and control iPod/iPhone for music, video, and photo playback.
How to choose and apply different sound field modes for audio playback.
Specific sound fields optimized for movie playback like HD-D.C.S. and Dolby/DTS modes.
How to select and switch between different AV equipment for remote operation.
Explains enjoying audio/video in a zone other than the main zone.
Explanation of Sony's BRAVIA Sync feature and its reliance on HDMI CEC.
Procedure to clear all settings and reset the receiver to its original factory defaults.
Steps to enter and navigate the main settings menu on the TV screen.
Overview of settings related to initial setup and speaker configuration options.
Re-running the Easy Setup process for basic receiver configuration.
Using the Digital Cinema Auto Calibration for automatic speaker setup and matching.
Calibrating speaker phase characteristics for better surround sound imaging.
Manually adjusting the volume level for each individual speaker.
Converting analog video input signals to various resolutions for output.
Enabling HDMI control and signal pass-through functions.
Customizing input display names, icons, and visibility in menus.
Safety guidelines for handling objects, power sources, and heat buildup.
Solutions for automatic power changes, no picture/sound, and hot receiver issues.
General| Bi-amping | Yes |
|---|---|
| Night mode | No |
| Sample rate | 192 kHz |
| Product color | Black |
| Connector contacts plating | Nickel |
| Case or master carton weight | 15 kg |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 290 W |
| Dimensions (WxDxH) | 500 x 258 x 487 mm |
| Total Harmonic Distortion (THD) | 0.09 % |
Weight and Dimensions| Weight | 12400 g |
|---|
To Next Page
