What should I do if the subwoofer is not functioning with my Sony Receiver?
If the subwoofer is not functioning with your Sony Receiver, check that the subwoofer is connected correctly and securely. Make sure you have turned on your subwoofer.
What to do if my Sony Receiver is overheating?
If the top of your Sony Receiver is hot, this is specific to this amplifier and is not a malfunction.
Why does my Sony STR-DA2800ES Receiver turn on automatically?
If your Sony Receiver is turning on automatically, it might be due to the “Control for HDMI” being set to “On” or “Pass Through” being set to “Off.” In this case, the receiver may be turned on by operating other equipment connected to it.
What to do if there is no sound on my Sony STR-DA2800ES Receiver?
If there is no sound from your Sony Receiver, verify that the speakers and equipment are correctly connected and turned on. Ensure the MASTER VOLUME is not set too low (try around -40 dB). Check that SPEAKERS is not set to OFF. Also, make sure the muting function is not enabled, headphones are not connected, and the correct input is selected. If you want to listen to the sound from the TV speaker, set “Audio Out” to “TV+AMP” in the HDMI Settings menu.
Why is there no sound from my USB device on Sony STR-DA2800ES Receiver?
If no sound is output from the USB device connected to your Sony Receiver, turn off the receiver, disconnect the USB device, then turn it back on and reconnect the USB device. Ensure that you connect a supported USB device. Press N to start playback. When “2ch Analog Direct” is being used, the sound is not output; use another sound field. The music data itself may contain noise, or the sound may be distorted. Depending on the file format, there may be files that sometimes cannot be played back.
What to do if the iPod/iPhone cannot be charged on my Sony Receiver?
Check that the receiver is turned on. Make sure the iPod/iPhone is connected firmly.
What to do if when the Zone2 Out function is enabled and you select the same HDMI input for both the main zone and zone 2, there may be some interference on the audio with my Sony Receiver?
To avoid possible interference in the main zone, you can place priority on the main zone for HDMI input selection.
What to do if the Pass Through function does not work on my Sony STR-DA2800ES?
If the Pass Through function does not work on your Sony Receiver, select “HDMI A” using the HDMI OUTPUT button. When “Control for HDMI” is set to “On” and “Pass Through” is set to “Auto,” the receiver saves power consumption in standby mode according to the TV status. To enable the power saving, the “Control for HDMI” on the TV should be set effective. If it is not effective, set “Pass Through” on the receiver to “On.
What to do if recording cannot be carried out on my Sony Receiver?
Check that the equipment is connected correctly. Select the source equipment. Check the connection of the recording deck according to the video signals you want to record. Analog input signals (composite video) can be output only from the analog output jacks. Video input signals via the HDMI IN jacks cannot be recorded. If copyright protection to prevent recording is contained in the sources, you may not be able to record from the sources. While only composite video signals are being recorded, set “Auto Standby” to “Off”. Be sure to use a connecting cable for the HDMI jack corresponding to a High Speed HDMI cable when you want to view images or listen to sound, especially for 1080p, Deep Color, or 3D or 4K transmissions.
How to fix the remote control if it's not working with my Sony STR-DA2800ES Receiver?
If the remote control is not functioning with your Sony Receiver, point the remote control at the remote sensor on the receiver. Remove any obstacles in the path between the remote control and the receiver. If the batteries are weak, replace all the batteries in the remote control with new ones. When you start operating the receiver, make sure to press AMP on the remote control first, then select the devices you want to use by pressing one of the input buttons.
Essential safety guidelines to prevent hazards like fire and electric shock.
Identification and function of the receiver's front panel components.
Details on digital, antenna, LAN, RS232C, and control jacks on the rear.
Identification and function of buttons on the RM-AAU155 remote control.
Essential steps and information before connecting any equipment to the receiver.
Explains different speaker setups like 7.1, 5.1 channels, and their configurations.
Detailed diagrams and instructions for connecting speaker wires to receiver terminals.
Steps and diagrams for connecting a TV using an HDMI cable.
How to connect devices with HDMI output jacks to the receiver's HDMI inputs.
Explanation of HDMI audio/video support, Control for HDMI, and high-resolution formats.
How to connect audio equipment with HDMI output jacks to the receiver.
How to properly connect the AC power cord to the receiver and wall outlet.
Using the on-screen Easy Setup for initial receiver configuration.
How to access and navigate the main home menu options.
Steps to select, play, and control audio/video content from connected devices.
Steps to connect a USB device and play back video, music, or photo files.
How to connect and control iPod/iPhone for music, video, and photo playback.
How to choose and apply different sound field modes for audio playback.
Specific sound fields optimized for movie playback like HD-D.C.S. and Dolby/DTS modes.
How to select and switch between different AV equipment for remote operation.
Explains enjoying audio/video in a zone other than the main zone.
Explanation of Sony's BRAVIA Sync feature and its reliance on HDMI CEC.
Procedure to clear all settings and reset the receiver to its original factory defaults.
Steps to enter and navigate the main settings menu on the TV screen.
Overview of settings related to initial setup and speaker configuration options.
Re-running the Easy Setup process for basic receiver configuration.
Using the Digital Cinema Auto Calibration for automatic speaker setup and matching.
Calibrating speaker phase characteristics for better surround sound imaging.
Manually adjusting the volume level for each individual speaker.
Converting analog video input signals to various resolutions for output.
Enabling HDMI control and signal pass-through functions.
Customizing input display names, icons, and visibility in menus.
Safety guidelines for handling objects, power sources, and heat buildup.
Solutions for automatic power changes, no picture/sound, and hot receiver issues.
General| Bi-amping | Yes |
|---|---|
| Night mode | No |
| Sample rate | 192 kHz |
| Product color | Black |
| Connector contacts plating | Nickel |
| Case or master carton weight | 15 kg |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 290 W |
| Dimensions (WxDxH) | 500 x 258 x 487 mm |
| Total Harmonic Distortion (THD) | 0.09 % |
Weight and Dimensions| Weight | 12400 g |
|---|
To Next Page
