What to do if the USB device is not recognized by my Sony Receiver?
If your Sony Receiver is not recognizing the USB device, turn off the receiver, then disconnect the USB device. Turn on the receiver again and reconnect the USB device. If the USB device still does not work properly, refer to the USB device operating instruction on how to deal with this problem.
Why is there no sound from a specific device connected to my Sony Receiver?
Check that the device is connected correctly to the audio input jacks for that device. Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the device.
Why is the top of my Sony STR-DA2800ES hot?
The top of the Sony Receiver getting hot is not a malfunction.
Why does my Sony STR-DA2800ES turn off automatically?
Your Sony Receiver might be turning off automatically because the “Auto Standby” feature is set to “On”. To prevent this, set “Auto Standby” to “Off”. Another reason could be that the sleep timer function is active, or the “PROTECTOR” function is enabled.
Why is multi-channel sound not outputting from my Sony Receiver?
If multi-channel sound cannot be output from your Sony Receiver, and “Control for HDMI” is set to “On,” “Audio Out” may be automatically set to “AMP.” In this case, set “Audio Out” to “AMP.”
Why is Dolby Digital or DTS multi-channel sound not working on Sony Receiver?
If Dolby Digital or DTS multi-channel sound isn't being reproduced on your Sony Receiver, check that the DVD, etc., you are playing is recorded in Dolby Digital or DTS format. When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting on the connected equipment. High Bitrate Audio (DTSHD Master Audio, Dolby TrueHD), DSD, and multi-channel Linear PCM can only be enjoyed with an HDMI connection.
How to eliminate hum or noise from Sony STR-DA2800ES Receiver?
If you're hearing a severe hum or noise from your Sony Receiver, check that the speakers and equipment are connected correctly. Ensure connecting cords are away from transformers, motors, TVs, or fluorescent lights (at least 3 meters away). Move your TV away from the audio equipment. If the plugs and jacks are dirty, wipe them with a cloth slightly moistened with alcohol.
What to do if “2ch Analog Direct” is being used and the sound is not output from my Sony Receiver?
Use other sound field.
What to do if when I select “My Video,” “My Music,” “My Photo,” “Internet Video,” “Internet Music,” “Network,” or “Sony Entertainment Network” from the Watch/Listen menu, no picture is output from my Sony STR-DA2800ES Receiver?
Select “BD” or “DVD” using INPUT SELECTOR on the receiver once, then set “Playback Resolution” to “480i/576i” or “480p/576p” in the Video Settings menu using the GUI, and select the content again.
What to do if a test tone is not output from the speakers of my Sony STR-DA2800ES?
If a test tone is not output from the speakers of your Sony Receiver, the speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. The speaker cords may have the short-circuit problem.
Essential safety guidelines to prevent hazards like fire and electric shock.
Identification and function of the receiver's front panel components.
Details on digital, antenna, LAN, RS232C, and control jacks on the rear.
Identification and function of buttons on the RM-AAU155 remote control.
Essential steps and information before connecting any equipment to the receiver.
Explains different speaker setups like 7.1, 5.1 channels, and their configurations.
Detailed diagrams and instructions for connecting speaker wires to receiver terminals.
Steps and diagrams for connecting a TV using an HDMI cable.
How to connect devices with HDMI output jacks to the receiver's HDMI inputs.
Explanation of HDMI audio/video support, Control for HDMI, and high-resolution formats.
How to connect audio equipment with HDMI output jacks to the receiver.
How to properly connect the AC power cord to the receiver and wall outlet.
Using the on-screen Easy Setup for initial receiver configuration.
How to access and navigate the main home menu options.
Steps to select, play, and control audio/video content from connected devices.
Steps to connect a USB device and play back video, music, or photo files.
How to connect and control iPod/iPhone for music, video, and photo playback.
How to choose and apply different sound field modes for audio playback.
Specific sound fields optimized for movie playback like HD-D.C.S. and Dolby/DTS modes.
How to select and switch between different AV equipment for remote operation.
Explains enjoying audio/video in a zone other than the main zone.
Explanation of Sony's BRAVIA Sync feature and its reliance on HDMI CEC.
Procedure to clear all settings and reset the receiver to its original factory defaults.
Steps to enter and navigate the main settings menu on the TV screen.
Overview of settings related to initial setup and speaker configuration options.
Re-running the Easy Setup process for basic receiver configuration.
Using the Digital Cinema Auto Calibration for automatic speaker setup and matching.
Calibrating speaker phase characteristics for better surround sound imaging.
Manually adjusting the volume level for each individual speaker.
Converting analog video input signals to various resolutions for output.
Enabling HDMI control and signal pass-through functions.
Customizing input display names, icons, and visibility in menus.
Safety guidelines for handling objects, power sources, and heat buildup.
Solutions for automatic power changes, no picture/sound, and hot receiver issues.
General| Bi-amping | Yes |
|---|---|
| Night mode | No |
| Sample rate | 192 kHz |
| Product color | Black |
| Connector contacts plating | Nickel |
| Case or master carton weight | 15 kg |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 290 W |
| Dimensions (WxDxH) | 500 x 258 x 487 mm |
| Total Harmonic Distortion (THD) | 0.09 % |
Weight and Dimensions| Weight | 12400 g |
|---|
To Next Page
