Sony STR-DH710 - System Audio Control for TV Sound; Outputting TV Sound Through Receiver Speakers

Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
- When you connect a TV that does not have System
Audio Control function. the System Audio Control
function does not work.
-
]f the TV is turned on before turning on the
receiver. the TV sound will not be output for a
moment.
/1
,---------
You can also use the System Audio Control
function as follows.
•
If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the speakers
connected to the receiver. However. if you
turn off the receiver, the sound will output
from the
TV speakers.
• When you adjust the TV volume. the
receiver's volume is adjusted
simuItaneollsI y.
TV
Sets System Audio
Control to on
Minimizes TV
volume
Receiver
--+ • Turns on (if in
standby
mode)
• Switches to
appropriate
HOMI input
Outputs TV
sound
-
Notes
-If System Audio Control does not function
according to your TV setting. refer to the operating
instructions of the TV.
- When "CTRL.HDMI"' is set to "CTRL ON". the
··AUDIO.OUr settings in the HDMI menu will
set automatically depending on the System Audio
Control settings.
57
GB