Sony STR-DH710 - Stabilizing S-AIR Reception; Troubleshooting Poor S-AIR Reception

Stabilizing S-AIR
reception
Check the following when S-AIR reception is
poor or unstable.
- Confirm the wireless adapters are inserted
correctly (page 31).
- Confirm that the S-AIR IDs
of the S-AIR
main unit and sub unit are the same (page
61).
• Adjust the location (height, orientation, and
place
in the room) of S-AIR products until
reception
is the most stable.
- Place so that the wireless adapters
of the
S-AIR main unit and sub unit are closer.
Check the following.
• Keep cords that are connected to the S-AIR
product (AC power cord (mains lead),
speakercords, orother cords) away from the
wireless adapter and slot.
o
~~~[Im"~~c,~~)!o·~ ))(( ~
o ~ ~
- ~
-.~ ~ ...
- Place so that S-AIR products are separated
from other wireless devices.
tm
»)
~oo[1 .11. 0 ~
~.' "... . .
) ..•. ~ 0 ~~====== 0 0 0
- ~ ~ q
...... ~ 0
- Place so that S-AIR products are separated
from metal doors
or tables.
•
If you still cannot improve S-AIR reception,
change the
"RF SETUP" setting (page 65).
• Keep as much space as possible around
S-AIR products.
- Avoid placing S-AIR products on top
of or
directly below other electronic equipment.
- Avoid placing S-AIR products
in a closed
rack, metal rack or under a table.
66
GB