Enjoying
the
sound/
images
from
other
inputs
1';00
Ic=:;]l.
__
.Q
IJAssign
t,?
DVD
input)~ck
~
00000000
, 0
~-
- uSing
A.
ASSIGN
In
o
~f""'-..
AUDIO menu
Receiver - using
"v.
ASSIGN"
in
VIDEO
menu
You can reassign audio and/or video signals to
another input when they are not currently
being used.
For example when you want to connect your
DVD player but cannot find an unused input:
DVD
player
1 Press AMP MENU.
2 Press
+1+
repeatedly to select
"AUDIO" or "VIDEO", then
press
EB
or +.
3 Press
+1+
repeatedly to select
"A. ASSIGN" or "V. ASSIGN",
then press
EB
or +.
4 Press
+1+
repeatedly to select
the input name you want to
assign (for example, "DVD").
5 Press
EB
or + to enter your
selection.
6 Press
+1+
repeatedly to select
the input jack you want to
assign to the input which you
selected
in
step 4.
To
return to the previous display
Press
•.
To
COMPONENT
VIDEO
IN
1
jacks
(video signal)
To
OPTICAL
SAT/CATV
IN
jack (audio
signal)
11
Advanced
Operations
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Switching
between
digital
and
analog
audio
(INPUT
MODE)
• ANALOG
Specifies the analog audio signals. input to the
AUDIO IN
(UR)
jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the Analog Direct function is selected, audio
input is set to "ANALOG" automatically and you
cannot select other modes.
• When HOM!
1-3
or DMPORT input is selected,
,,------" appears on the display, and you cannot
select other modes. Select
an
input mode other than
the HDMI
1-3
and DMPORT input, then set the
audio input mode.
When you connect components to both digital
and analog inputjacks on the receiver, you can
fix the audio input mode to either
of
them,
or
switch from one to the other, depending on the
type
of
material you intend to watch.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
Audio input modes
• AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If
there are no digital audio signals, analog
audio signals are selected.
68
G8
To Next Page
Loading...
