MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting the antennas (aerials)
Connect the supplied antennas (aerials) to the receiver as illustrated below.
Be sure to disconnect the AC power cord (mains lead) before connecting the antennas (aerials).
AM loop antenna (aerial) (supplied)
FM wire antenna (aerial) (supplied)
Note
To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices.
Be sure to fully extend the FM wire antenna (aerial).
After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Related Topic
Notes on connecting cables
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
To Next Page
Loading...
