50
[G] Displaying Information On the Monitor – STATUS Menu
Chapter 2 Menu
Setting Lists in the STATUS Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is preceded
by a menu number. These numbers are not displayed on
the screen.
For more information on the menu numbers, see “About
menu numbers” on page 23.
• The arrow mark (k) refers you to another setting list
that appears after you make the setting, or to an operation
that is to be carried out as a result of the setting.
[G] STATUS menu
Select the STATUS (1/2) menu or STATUS (2/2) menu.
STATUS (1/2) menu
CH STATUS...: Display the information of the used
channel. k[G1]
SLOT STATUS...: Display the type of OPTION 1 to
3. k[G2]
HD-SDI/D1...: Display when BKM-61D is
installed.
SDI/COMPOSITE...: Display when BKM-62HS
is installed.
COMPONENT...: Display when BKM-68X is
installed.
EMPTY...: Display when no adaptor is installed.
STATUS (2/2) menu
Data on the monitor and controller (controlled monitor) is
displayed.
MODEL NAME: Model name of the monitor
SERIAL NO: Serial number of the monitor
SOFTWARE VERSION: Software version of the
monitor
OPERATION TIME: Operation time (in hours) of
the monitor
CRT TURN ON TIME: Used time of the CRT (in
hours)
IP ADDR: IP address of the monitor
CONTROLLER STATUS...: Information on the
controller (controlled monitor) k[G3]
[G1] CH STATUS... menu
Display the information on the used channel.
The information of the assigned internal signal is displayed
on the channels 80 to 89 and 91 to 97.
CH: Channel number
OP: Option slot number (OPTION1 to 3)
IN: Input connector number
FORMAT: Input signal format
NAME: Channel name
The information of the internal signal is displayed
in channels 80 to 89 and 91 to 97.
[G2] SLOT STATUS menu
Display the type of input adaptor installed in OPTION1 to
3.
MODEL NAME: Model name
SERIAL NO: Serial number
[G3] CONTROLLER STATUS... menu
Display information on the controller (controlled monitor).
MODEL NAME: Model name
SERIAL NO: Serial number
SOFTWARE VERSION: Software version
IP ADDR: IP address
To Next Page
Loading...
Need help?
General