23
Basic Menu Operations
Chapter 2 Menu
Displaying the Menu
Press the MENU button.
The main menu is displayed on the screen.
When you select one item on the main menu, the level 1
menu corresponding to the selected item on the main menu
appears.
For information about the items on the main menu, see
“Menu Structure” on page 26.
Menu settings displayed in blue cannot be changed.
About menu numbers
For purposes of explanation in this manual, the menu
number is used, the alphabet determines the classification
of menu on the main menu, and the numbers determine the
level and the order. These menu numbers are not shown on
the screen.
Only when the explanation is required, the menu number is
used. The menu number is not counted when explanation is
not required.
Menu Operation
Follow the steps described below to display the menu and
perform the adjustment or setup you wish.
1
Press the MENU button.
The main menu is displayed.
2
Using the UP or DOWN button or PHASE knob, move
the cursor to the desired item. (Example: select the
INPUT CONFIGURATION... menu by pressing the
DOWN button.)
3
Press the ENTER button or Ent button.
The Level 1 of the selected menu is displayed.
Note
Note
PICTURE ADJ...
COLOR TEMP ADJ...
INPUT CONFIGURATION...
SYSTEM CONFIGURATION...
INSTALLATION SETTINGS...
FILE MANAGEMENT...
STATUS...
CONTROLLER...
KEY PROTECT OFF
MENU
A221
Indicates the PICTURE ADJ menu.
Indicates the second menu in Level 1.
Indicates the second menu in Level 2.
Indicates the first menu in Level 3.
Example: [A221]
PICTURE ADJ...
COLOR TEMP ADJ...
INPUT CONFIGURATION...
SYSTEM CONFIGURATION...
INSTALLATION SETTINGS...
FILE MANAGEMENT...
STATUS...
CONTROLLER...
KEY PROTECT OFF
MENU
Cursor
CH01
FORMAT... SDI HD/D1 AUTO
SLOT NO OPTION1
INPUT NO DIGITAL1
SCREEN ASPECT 16:9
SCAN SIZE NORMAL
SYNC MODE ---
COLOR TEMP D93
PICTURE PRESET PRESET1
MATRIX...
INPUT CONFIGURATION
To Next Page
Loading...
Need help?
General