9
Overview
Chapter 1 Overview
BKM-62HS HD SDI/SDI Input Adaptor
Includes a decoder for HD serial digital signals and serial
digital component (525/625) signals and input/output
connectors for two serial digital signal. Dual-Link input is
also available for HD serial digital signals.
The signal from the MONITOR OUT connector of the
BKM-62HS does not satisfy the ON-LINE signal
specifications.
BKM-68X Analog Component Input Adaptor
Analog component signals or analog RGB signals are
input. Input/output connectors for one channel are
equipped.
Connector Panel Configuration
By adding the optional decoder adaptor or input expansion
adaptors, the input/output connector panel can be
assembled in a wide variety of configurations. The signals
that each of the adaptors’ connectors supports are given in
the right table. The type of signal to be applied to each
input/output connector is set with the INPUT
CONFIGURATION menu.
The BKM-61D cannot provide proper active-through
outputs if a signal whose input No. format is not selected in
the INPUT CONFIGURATION menu is input. (If AUTO
is selected, input a signal which has the same format with
the signal monitored last.)
For information about the INPUT CONFIGURATION
menu, see “
[C]
Setting the Input Configuration – INPUT
CONFIGURATION Menu” on page 34.
a: Signal can be reproduced.
Note
Note
Input
Adaptor
SDI/
Analog
Multi Input
Adaptor
BKM-61D
HD SDI/SDI
Input
Adaptor
BKM-62HS
Analog
Component
Input
Adaptor
BKM-68X
Input
signal
Serial
Digital
Input
Component
525/625
aa
Composite
NTSC
a
Composite
PAL
a
HD-SDI a
Analog
Input
Composite
NTSC
a
Composite
PAL
a
Composite
PAL-M
a
Composite
SECAM
a
YP
BPR 525/
625
a
GBR 525/
625
a
Y/C NTSC a
Y/C PAL a
Y/C PAL-M a
Y/C SECAM a
YP
BPR/GBR
1080/48I
a
YP
BPR/GBR
1080/50I
a
YP
BPR/GBR
576/50P
a
YP
BPR/GBR
480/60P
a
YP
BPR/GBR
1035/60I
a
YP
BPR/GBR
1080/60I
a
YP
BPR/GBR
720/50P
a
YP
BPR/GBR
720/60P
a
Number of digital
Inputs
22 –
Number of analog
Input
3– 1
To Next Page
Loading...
Need help?
General