Sony VPL-ES5 - Front Case Assembly and IR Sensor Board; Fan (Exhaust) -1

1-5
VPL-ES5/EX5/EX50/EX5U/EW5
1-3-5. Front Case Assembly and IR Sensor Board
1-3-6. Fan (Exhaust) -1
2 Four claws
6 IR sensor board
5 Tapping screw
(M3 x 7)
1 Lens cap
4 Front case assembly
J7
3 Logo
5 Screw (+P M3 x 6)
8 Screw
(+PWH M3 x 6)
6 Loosen screw.
9
Lamp power supply
connector
0 Door detection switch
harness
7 Lamp assembly
4 Front case assembly
2 MB bracket
3 Power board
(Refer to section 1-3-5, steps 1 to 3.)
(Refer to section 1-3-1, steps 2 to 4.)
1 Lamp door assembly
Caution :
Because the harness has the shape of flat
cross-section, do not insert the harness into the
harness clamp section with excessive force.
Find out the direction in which the harness can
be inserted easily, and then insert the harness.
Harness
Harness clamp section
Lamp box assembly
(Refer to section 1-3-4, steps 2 to 11.)