Setting Up and Using Memory Keys 53
Programming a function in an empty memory key
It may be that your system does not support one or more of these features
for you. If that is the case, you will not have access to them.
You can program specific functions under a memory key allowing access
to the function by way of a single key press.
The following functions can be programmed under a memory key:
• Divert all calls
• Call-back
• Divert on busy
• Do not disturb
• DTMF
• Message waiting
• Call wait. beep
• Autom. answering
• Ringer
• On/off hook for voice
• Direct Password
• Autom. answering 1 h
• Handset without hook
• Headset
• TAPI (phone, not applicable to the ErgoLine@Net)
The following function can be accessed in Special mode (see the section
Entering the special mode):
• Night mode
You can find explanations for all of these functions in the glossary at the
back of this book.
To Next Page
Loading...
