Setting Up and Using Memory Keys 55
Programming a groupfacility in an empty memory
key
You can program group facilities under a memory key allowing access to
the facility by way of a single key press.
The following group facilities can be programmed under a memory key:
• Absent for calls
• Group absence
• Incoming intercom
• Softring
• Status monitoring
• Show absent/present
• Group facility
• Group member calls
• Group member (intercom)
• Private calls
• Personal calls
• Executive calls
• Group calls
• Private park
• Group park
• Divert to altern. secr.
The following feature can be accessed in Special mode:
• Line key
You can find explanations for all of these features in the glossary at the
back of this book. continued on next page.
Note: It may be that your system does not support one or more of these
group features. If that is the case, you will not have access to them.
To Next Page
