Heater-Cooler System 3T • Operation
5.8 CP_IFU_16-XX-XX_USA_015
Error displays
In case of any error arising during the self-test, the following error codes are shown on the displays:
Fig. 13: Error displays
◗ The 7-segment display(s) show “EE(E)”, alternating with an error code (1...63). This display
indicates an internal error of the heater-cooler. The circuit in question cannot be used. The other
circuit, however, functions without restrictions.
For detailed information please refer to chap. 5.5 “Alarm and error displays” on page 5.13.
°C °C
°C °C
12
°C
°C
37.6
20.1EE
EE
EE
EE
To Next Page
Loading...
