Heater-Cooler System 3T • Routine maintenance
6.2 CP_IFU_16-XX-XX_USA_015
6.1 General instructions for maintenance
6.1.1 Safety instructions for routine maintenance
!
◗ It is essential for the safe operation of the heater-cooler that the hygiene measures (cleaning
and disinfection) are carried out regularly and completely.
◗ Disconnect the heater-cooler from the power supply and empty the water tanks prior to carrying
out routine maintenance.
◗ The water circuits must be disinfected prior to operating the heater-cooler for the first time and
when placing the system in storage. The heater-cooler water circuits include the pump, heating
and cooling tanks, fittings and all interconnecting tubing. Detailed information on this subject
is provided in chap. 6.3.
◗ Re-use of disposables, in particular of single-use heating blankets, is not allowed. Re-used
heating blankets are a breeding ground for microbes and can lead to the contamination of the
heater-cooler.
◗ Only use tubings that are certified for drinking water systems.
◗ Do not fail to observe the regulations concerning routine maintenance, as well as the
prescribed maintenance intervals stated in these operating instructions.
◗ Only use cleaning agents and disinfectants in compliance with chap. 6.2 and 6.3.
◗ Wear protective gloves when cleaning and disinfecting the system!
◗ Wear protective goggles during the disinfection process.
◗ Wear protective gloves when disconnecting used tubing systems and disposables!
◗ All ventilation grills must be cleaned at regular intervals or in case of contamination. Detailed
information on this subject is provided in chap. 6.6.
◗ Routine maintenance work must only be performed by qualified personnel.
◗ Repairs must only be carried out by authorized service technicians. Only original spare parts
from SORIN GROUP DEUTSCHLAND GMBH may be used in order to guarantee the safe
functioning of the heater-cooler.
To Next Page
Loading...
