Sound Devices 833 User Manual

Power
Allows configuration of various power settings.
Power Source Icons
(Batt1, Batt2, DC, TC Batt,) Indicates the power condition of each power source. [Green = normal, yellow = below normal, red =
warning]
DC Ref
Allows proper power level indicator calibration based upon the type of DC power source used. [12V DC*, 14 V Li-Ion, 12 V Lead
Acid, Full Range (10-18 V), Smart Battery], NP1 Data
Power Source
Good
Marginal
Low
Shutdown
DC 12 V
12.50 V
11.00 V
10.10 V
9.50 V
Li-Ion 14 V
16.30 V
13.90 V
13.60 V
11.50 V
Lead Acid 12 V
14.00 V
11.50 V
10.30 V
10.20 V
Full Range
18.00 V
12.00 V
10.20 V
9.50 V
Smart Battery
16.00 V
13.50 V
12.60 V
10.75 V
NP1 Data Battery
16.30 V
13.90 V
13.60 V
11.50 V
Li-Ion L-Mounts
8.30 V
7.10 V
6.95 V
6.80 V
DC Loss
Selects how the unit should operate when DC power is lost. [Switch to Next Supply*, Turn Off].
Smart Battery Data
Displays Time Remaining, Percent Remaining, Cycle Count, and Temperature of Smart Battery.
Note: This menu is only displayed when a smart battery is connected.
833 User Guide 23

Sound Devices 833 Specifications

General

Number of Channels	8
Mic Inputs	6
Main Outputs	2
Aux Outputs	4
Headphone Output	1
Bit Depth	24-bit
Timecode	Yes
Dynamic Range	120 dB
Microphone Preamps	6
Analog Outputs	4
Type	Portable Mixer-Recorder
Line Inputs	6
AES Inputs	2
Sampling Rate	up to 192 kHz
Recording Media	SD, SDHC, SDXC
Power	Battery or External DC
Frequency Response	10 Hz to 80 kHz
THD+N	0.005%
Digital Outputs	2