EasyManuals Logo

Sound Devices 833 User Manual

Sound Devices 833
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Timecode
Timecode Mode
Selects the timecode mode of operation. [Off, Record Run, Free Run*, Free Run Auto Mute, Free Run Jam Once, 24 Hour Run
(ToD), 24 Hour Run Auto Mute, Ext TC, Ext TC - Auto Record, Ext TC Continuous, Ext TC Cont. - Auto Record]
Frame Rate
Selects the current frame rate. [23.98*, 24, 25, 29.97 ND, 29.97 DF, 30 ND, 30 DF]
Hold Off
Selects the amount of time incoming Timecode needed to be considered valid timecode prior to entering record when in auto-record
mode. [0.0*-8.0 seconds in steps of 0.1 sec.]
Jam
Indicates the Received TC, Generator TC and the calculated difference between the two. Received and Generator UBits are shown.
Jamming to external TC and UBits is supported.
Jam TC- Toggle Rtn/Fav switch to jam to external TC.
833 User Guide 39

Other manuals for Sound Devices 833

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sound Devices 833 and is the answer not in the manual?

Sound Devices 833 Specifications

General IconGeneral
Number of Channels8
Mic Inputs6
Main Outputs2
Aux Outputs4
Headphone Output1
Bit Depth24-bit
TimecodeYes
Dynamic Range120 dB
Microphone Preamps6
Analog Outputs4
TypePortable Mixer-Recorder
Line Inputs6
AES Inputs2
Sampling Rateup to 192 kHz
Recording MediaSD, SDHC, SDXC
PowerBattery or External DC
Frequency Response10 Hz to 80 kHz
THD+N0.005%
Digital Outputs2

Related product manuals