Channels 7-8
When the optional +4 Plugin is installed, this menu is titled Channels 7-12. Provides access to channel screens 7-8 or 7-12 with +4
Plugin installed.
Access to channel screens is also possible by using the */** + PFL switch shortcuts:
* + PFL 1 = Ch 7
* + PFL 2 = Ch 8
* + PFL 3 = Ch 9 (with +4 Plugin)
* + PFL 4 = Ch 10 (with +4 Plugin)
* + PFL 5 = Ch 11 (with +4 Plugin)
* + PFL 6 = Ch 12 (with +4 Plugin)
Trims, Faders and PFL’s for channel’s 7 and 8 (or 7-12 with the +4 Plugin) can be controlled by a combination of the toggle
switches beneath the LCD and the Select and HP Knobs. Setup in the System>Toggle Switch Action menu. See the Toggle Switch
Action section for information on which of the following options are available for each toggle switch:
Ch 7 or 8 Trim/PFL (latch)
Flick toggle then rotate Select to adjust ch 7 or 8 trim. Gain values are displayed in the Home Screen sample rate field. Press Select
to PFL. Flick toggle to cancel mode.
Ch 7 or 8 Fader/PFL (latch)
Flick toggle then rotate Select to adjust ch 7 or 8 fader. Gain values are displayed in the Home Screen sample rate field. Flick toggle
to cancel mode
Ch 7 Trim/PFL (Moment)
Hold toggle then rotate Select to adjust ch 7 trim. Gain values are displayed in the Home Screen sample rate field. Press Select to
PFL
Ch 8 Trim/PFL (Moment)
Hold toggle then rotate HP to adjust ch 8 trim. Gain values are displayed in the Home Screen sample rate field. Press HP to PFL
Ch 7 Fader/PFL (Moment)
Hold toggle then rotate Select to adjust ch 7 fader. Gain values are displayed in the Home Screen sample rate field. Press Select to
PFL
Ch 8 Fader/PFL (Moment)
Hold toggle then rotate HP to adjust ch 8 fader. Gain values are displayed in the Home Screen sample rate field. Press HP to PFL
To Next Page
Loading...
Need help?
General
