SD-Remote
All SD-Remote pictures in this section were captured with SD-Remote connected to a Scorpio. Views and navigation are the same
on the 833 except for fewer channels, buses, and outputs.
SD-Remote is a mobile device application designed to pair with the 833. SD-Remote is available for Android tablets and phones in
the Google Play Store or as an APK from www.sounddevices.com, and for iPhone and iPad in the App Store. An Android tablet can
be hardwired to the 833 via USB or wirelessly connected via Bluetooth LE. An Android phone, iPhone, or iPad wirelessly connects
to the 833 via Bluetooth LE. SD-Remote offers control and display parameters, including the following:
1. Channel, Bus, and Output Meters
2. Channel, Bus, and Output Names
3. Channel, Bus, and Output Source selection
4. Channel, Bus, and Output Mutes
5. Channel and Bus Solos
6. Channel and Bus Record Arm/Disarm
7. Channel Trim Gains, Fader Gains, and Pans
8. Bus and Output Faders
9. Channel, Bus, and Output Linking
10. Channel and Output Delay
11. Channel HPF, Iso, Phase, Limiter
12. Transport-dependant Output Muting
13. Record, Stop, Play, FFWD, REW
14. False Take and Circle Take
15. Take List and Metadata Editing
16. Timecode
17. Reports
18. File Transfer
First download and install the SD-Remote app from the Google Play Store or App Store.
SD-Remote requires the following minimum operating systems:
To Next Page
Loading...
Need help?
General
