● iPad running iOS 12 or iPadOS 13+
● iPhone running iOS 12+
● Android tablets require Android 6 Marshmallow for USB connection. The device needs to support MIDI and BLE in order
to operate.
● Android phones and tablets require Android 7 Nougat when connecting via Bluetooth LE. The device needs to support
MIDI and BLE in order to operate.
Note: It is recommended to close the SD-Remote app before powering down the 8-Series. This will help prevent the SD-Remote app
not connecting after the next boot up. Should SD-Remote not connect to the 8-Series, FULLY close then restart the app.
USB Setup Procedure for Android
1. Connect Android tablet to the 8-Series Mixer-Recorder via USB-A port.
2. Open the SD-Remote app, access Settings [gear icon], and choose to connect via USB.
3. On the Android tablet, open the quick settings drop down menu.
4. Touch “USB Android System” twice to open “Use USB to” dialog box.
5. Touch “Connect a MIDI device.”
“No USB Connection” popup will appear when SD-Remote does not detect presence of an 8-Series Mixer-Recorder.
Bluetooth Setup Procedure for Android
1. On the 8-Series Mixer-Recorder, set Bluetooth to On in the System>Bluetooth menu.
2. Open the SD-Remote app, access the settings tab, and choose “Connect via Bluetooth”.
3. Access any Metering tab and touch the Sound Devices logo button to display a list of 8-Series devices that can be
connected to via Bluetooth. When the Devices Found list is shown, Bluetooth connection to the currently selected device
is stopped.
4. Connect to a specific 8-Series device by touching the Bluetooth button next to its serial number. ‘Connecting…’ is
displayed. Wait for connection to take place. When connection is successful, the SD-Remote meter view is displayed.
“No Bluetooth Connection” popup will appear when SD-Remote does not detect presence of the selected 8-Series device.
For optimal Bluetooth LE connection, the Sound Devices XL-ANT2.4 Antenna must be fitted to the SMA port of the 8-Series device.
To Next Page
Loading...
Need help?
General
