Plugins
Plugins can be purchased and downloaded from store.sounddevices.com.
The following plugins are available for the 833:
833 +4
Adds four fully featured ISO channels/record tracks, turning your 833 into a 12 channel, 16 track mixer-recorder.
NoiseAssist
Suppress background noise instantly on-location with the optional NoiseAssist plugin for 8-Series mixer-recorders. Choose between
2, 4, and 8 instances that can be applied to any channel or bus!
CEDAR sdnx
CEDAR sdnx brings CEDAR Audio Ltd.’s highly-regarded noise suppression technology to 8-Series mixer-recorders. Choose
between 2, 4, and 8 instances that can be applied to any channel or bus!
To Install a Plugin
Ensure the firmware version is compatible with the plugin.
1. Download the plugin file from the plugin store.
2. Unzip the folder and locate the license (LIC) file.
3. Place the LIC file on the root of an SD card formatted by the 8-Series or place on the SSD while in file transfer mode.
4. Insert the SD card into the 8-Series.
5. Navigate to Menu>System>Plugins.
6. Enter the Plugins menu and select “Apply Plugins”. The plugin will install and the 8-Series mixer-recorder will restart.
Show Plugins
Allows you to see which Plugins have been installed on the device.