Sound Devices 833 User Manual

Shure ADX5D
The SL-2 or SL-6 Receiver Slot Power or the 8-Series power must be cycled after performing any action from the Shure ADX5D
user interface requiring the receiver to reboot. This includes powering the Shure ADX5D on and off, changing Transmission Mode,
changing 3rd Party Control, or performing a Factory Reset.
SuperSlot Control of the Shure ADX5D is only available when Device Cfg >> Advanced >> 3rd Party Control is On.
When the Shure ADX5D is in High Density Transmission mode, Groups and Channels must be set from the ADX5D interface.
833 User Guide 66

Sound Devices 833 Specifications

General

Number of Channels	8
Mic Inputs	6
Main Outputs	2
Aux Outputs	4
Headphone Output	1
Bit Depth	24-bit
Timecode	Yes
Dynamic Range	120 dB
Microphone Preamps	6
Analog Outputs	4
Type	Portable Mixer-Recorder
Line Inputs	6
AES Inputs	2
Sampling Rate	up to 192 kHz
Recording Media	SD, SDHC, SDXC
Power	Battery or External DC
Frequency Response	10 Hz to 80 kHz
THD+N	0.005%
Digital Outputs	2