Maintenance
27
Machine Maintenance
Recovery Tank Maintenance
The recovery tank is located beneath the recovery tank lid, positioned at the top of the
machine. For the sake of environmental protection, it is recommended to clean the recovery
tank after each use to prevent the development of unpleasant odors.
For safety: Before maintaining or leaving the machine, stop on the level ground and turn off
the machine.
1. Move the machine to a location where water can be drained.
2. Drain the recovery tank using the recovery tank drain hose.
3. Remove the recovery tank lid.
4. Remove the debris filter bag, empty and clean it.
5. Rinse the tank, float sensor and the float shut-off screen.
6. Clean the tank lid using a damp cloth.
7. Check the tank seal for damage or wear monthly, which is located on the bottom of the
recovery tank lid.
8. Install the debris filter bag back into the machine.
9. Put the tank lid onto the machine.
FIG.24
Water Recycling System Maintenance
The recycling system filters are located in the recovery tank. The filter element can be
replaced when the maintenance time is reached or when the filtering effect is
unsatisfactory.
To Next Page
Loading...