Maintenance
34
Notice: Steps 2 and 3 should not be switched, as it may cause electrical damage.
Battery Maintenance Precaution
WARNING: Do not disassemble or replace the battery without permission of the
manufacturer.
For safety: Before charging or leaving the machine, stop on the level ground.
⚫ Do not short circuit the battery, including the machine's charging port.
⚫ Do not crush or drop the battery.
⚫ Do not puncture the battery.
⚫ Do not vibrate the battery.
⚫ Do not expose the battery to flames or high-temperature environments exceeding 45℃.
⚫ Do not expose the battery to water or any other liquids.
⚫ Do not expose to sunlight, especially during charging.
⚫ Do not install with other battery types or brands.
⚫ Do not use other charger types or brands.
⚫ Dispose of the battery safely according to local regulations.
⚫ Charge and store battery under the following conditions:
The best storage temperature is 15℃/59℉~25℃/77℉.
Workstation Maintenance
Filling the detergent
The workstation has the feature of auto-filling detergent for the machine. the detergent should
be filled into the detergent tank regularly.
To fill the detergent into the tank, the following steps should be taken:
1) Release the tank cap.
2) Fill the detergent.
3) Wipe off the detergent, if any remains on the surface of the station.
4) Cover the cap.
Notice: Please fill the low or no foam detergent to make the water pick-up more effective.
Cleaning the water tank
The water tank is located behind the front cover(W12). Remove the cover and use the nozzle
to clean it.
To Next Page
Loading...