Spark L50 - Recovery Tank

To Next Page

To Previous Page

Know your Machine

Recovery Tank

FIG.3

38. Manual water filling port

39. Recovery tank shutoff float

40. Debris filter bag

41. Recovery tank float sensors

Manual water filling port (38): Used for filling the water into solution tank

Recovery tank shutoff float (39): Prevent the waste water from entering the vacuum motor if the

float sensor fails.

Debris filter bag (40): Filter debris to prevent clogging of the drain hose.

Recovery tank float sensor (41): Detect the water level in the recovery tank.

This machine is equipped with water recycling system and it is optional as shown in FIG.4.

Equipped with this feature, significant water savings have been achieved, aligning with the

goals of sustainable development.

FIG.4